Cars & Vehicles Auto Parts & Maintenance & Repairs

How to Wire Headlamp Flashers in a 2005 Tacoma

    • 1). Turn the engine of the Tacoma off and open the hood of the truck.

    • 2). Remove the rubber cover from the rear of the headlamp assembly to reveal the electrical wiring connector.

    • 3). Connect the electrical wiring connector to the headlamp assembly, and turn the headlamps on to test them. If the headlamps are malfunctioning, check the connection again. The connector will make a "click" sound when it is secured.

    • 4). Reattach the rubber cover to the headlamp assembly, and close the hood of the Tacoma.

Leave a reply